Quick Installation Guide

Before You Begin Hardware Overview
This installation guide provides instructions
for installing the DAP-2622 on your network.
Additional documentation is also available
on the D-Link support website.
• Nuclias Connect Manual: For
additional information and
instructions on how to configure the
device using Nuclias Connect.
• DAP-2622 User Manual: For
additional information and
instructions on how to configure the
device using the web user interface.
Package Contents
This DAP-2622 package includes the
following items:
• DAP-2622 Access Point
• Mounting Plate and Hardware
• Quick Start Guide
If any of the above items are damaged or missing,
please contact your local D-Link reseller.
Note: No power adapter is supplied with
this product. To power the unit, use an
802.3at PoE Switch.
System Requirements
• Computers with Windows®, Macintosh®,
or Linux-based operating systems with an
installed Ethernet Adapter
• Internet Explorer 11, Safari 7,
Firefox 28, or Google Chrome 33
and above (for configuration)
LED Indicators
1
Figure 1: Front Panel LED
#
LED
Description
Green (Solid) - Device
operational
Power/
Red (Flashing) - Device
1
booting up/Device
Status
malfunctioned
Red (Solid) - Device boot up
has failed
Table 1: LED Description
ENGLISH
DAP-2622 Quick Installation Guide 1