User's Manual

35D-Link DAP-2553 User Manual
Section 3 - Conguration
The device supports up to four multiple Service Set Identiers. In the Basic > Wireless section, you can set the Primary SSID.
The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to
establish a new wireless network.
Check to enable support for multiple SSIDs.
Check to enable the priority support for Multi-
SSID
This read-only value is the current band setting.
You can select up to three multi-SSIDs. With
the Primary SSID, you have a total of four
multi-SSIDs.
Service Set Identier (SSID) is the name designated
for a specic wireless local area network (WLAN).
The SSID’s factory default setting is
dlink. The
SSID can be easily changed to connect to an
existing wireless network or to establish a new
wireless network.
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
The Multi-SSID security can be Open System, WPA-Personal, or WPA-Enterprise. For a detailed description of the Open System
parameters, please go to page 23. For a detailed description of the WPA-Personal parameters, please go to page 24. For a detailed
description of the WPA-Enterprise parameters, please go to page 25.
Enable
Multi-SSID:
Enable Priority :
Band:
Index:
SSID:
SSID Visibility:
Security:
Multi-SSID