User's Manual

33D-Link DAP-2553 User Manual
Section 3 - Conguration
Wireless Resource Control
The Wireless Resource Control window is used to congure the wireless connection settings so that the device can detect the
better wireless connection in your environment.
Wireless band:
Connection
Limit:
User Limit:
11n Preferred:
Network Utili-
zation:
Aging out:
Select 2.4GHz in default.
Select Enable or Disable. This is an option for
load balancing. This determines whether to
limit the number of users accessing this device.
The exact number is entered in the User Limit
eld below. This feature allows the user to share
the wireless network trac and the client using
multiple APs. If this function is enabled and
when the number of users exceeds this value,
or the network utilization of this AP exceeds the
percentage that has been specied, the DAP-
2553 will not allow clients to associate with the
AP.
Set the maximum amount of users that are
allowed access (zero to 64 users) to the device
using the specied wireless band. The default
setting is 20.
Use the drop-down menu to Enable the 11n
Preferred function. The wireless clients with
802.11n protocol will have higher priority to
connect to the device.
Set the maximum utilization of this access point for service. The DAP-2553 will not allow any new clients to associate with the AP
if the utilization exceeds the value the user species. Select a utilization percentage between 100%, 80%, 60%, 40%, 20%, or 0%.
When this network utilization threshold is reached, the device will pause one minute to allow network congestion to dissipate.
Use the drop-down menu to select the criteria of disconnecting the wireless clients. Available options are RSSI and Data Rate.