User's Manual

DAP-2553 User’s Manual

D-Link AirPremier N Dual Band PoE Access Point

Channel:

All devices on the network must share the same channel.To change

the channel, ﬁrst toggle the Auto Channel Selection setting to Dis-

able, and then use the pull-down menu to make the desired selec-

tion. (Note:The wireless adapters will automatically scan and match

the wireless settings.)

Allows you to select the channel width you would like to operate in.

Select 20 MHz if you are not using any 802.11 wireless clients. Auto

20/40 MHz

allows you to both 802.11n and non-802.11n wireless

devices on your network.

Use the pull-down menu to choose Open System, Shared Key,

WPA-Personal,orWPA-Enterprise.

Select Open System to communicate the key across the

network.

Select Shared Key to limit communication to only those devices

that share the same WEP settings. If multi-SSID is enabled, this

option is not available.

Select WPA-Personal to secure your network using a password and

dynamic key changes. No RADIUS server is required.

Select WPA-Enterprise to secure your network with the inclusion

of a RADIUS server.

Using the Conﬁguration Menu

Channel Width:

Authentication: