User's Manual
32D-Link DAP-2360 User Manual
Section 3 - Conguration
Wireless Resource
The Wireless Resource Control window is used to congure the wireless connection settings so that the device can detect the
better wireless connection in your environment.
Select 2.4GHz or 5GHz.
Use the drop-down menu to Enable the 5G Preferred
function. When the wireless clients support both
2.4GHz and 5GHz and the 2.4GHz signal is not strong
enough, the device will use 5G as higher priority.
Enter the time in seconds to specify the interval of
updating information.
The 5G preferred dierence value is equal to the
number of 5GHz wireless client connections minus
the number of 2.4GHz wireless client connections.
If the number of 5GHz wireless client connections
minus the number of 2.4GHz wireless client connec-
tions exceed this value, the extra 5GHz wireless client
connections will be forced to connect to the 2.4GHz
band and not the 5GHz band.
Enter the maximum 5G connection attempts allowed
before the 5G preferred function will be disabled for
the wireless station connection.
Select Enable or Disable. This is an option for load balancing. This determines whether to limit the number of users accessing this de-
vice. The exact number is entered in the User Limit eld below. This feature allows the user to share the wireless network trac and the
client using multiple APs. If this function is enabled and when the number of users exceeds this value, or the network utilization of this
AP exceeds the percentage that has been specied, the DAP-2660 will not allow clients to associate with the AP.
Wireless
band:
Band
Steering:
Band
Steering Age:
Band
Steering
Dierence:
Band
Steering
Refuse
Number:
Connection
Limit: