User's Manual

42
D
-
Link
D
A
P
-
2330
U
ser
M
anual
S
e
c
tion
3
-
C
onfigu
r
a
tion
AP A rr a y
AP Array S can
The AP Array window is used to cr ea t e up to 32 APs on a local network to be organized into a single group in order to increase ease of managemen t .
Click the Save button to let your changes take eff ec t . Central WiFiManager and AP Array are mutually exclusive functions .
Enable AP A rr a y :
AP Array Name:
AP Array P assw or d:
Scan AP Array List:
C onnec tion S ta tus:
AP Array List:
C urr en t Members:
S elec t the check box to enable the AP array
function. The three modes that are available are
M ast er , Backup M ast er , and S l ave . APs in the
same array will use the same configuration. T he
c onfigur a tion will sync the M ast er AP t o the Sla v e
AP and the Back up M ast er AP when a Sla v e AP and
a Backup Master AP join the AP ar r a y .
En t er an AP array name for the group her e .
En t er an AP array password for the group her e .
This password must be the same on all the AP s
in the gr oup .
Click this button to initiate a scan of all the
available APs currently on the net w or k .
Display the AP array connection sta tus .
This table displays the current AP array status for
the following
p aram et e rs : Array Nam e , M as t er
IP, MAC, M ast er , Backup M ast er , Slave, and T otal .
T his table displays all the current ar r a y members .
The DAP-2330 AP array feature supports up t o
eight AP array members .