User's Manual

27
D
-
Link
D
A
P
-
2330
U
ser
M
anual
S
e
c
tion
3
-
C
onfigu
r
a
tion
Transmit P ow er:
WMM (Wi-Fi Multimedia):
Ack Time O ut
(2.4 GHZ, 64~200):
S hor t GI:
IGMP Snooping:
Multicast
B andwidth
C on tr ol :
HT20/40 Coexistence :
T his setting det ermines the po w er level of the wir eless tr ansmission. T ransmitting po w er can be adjust ed t o elimina t e overlapping
of
wireless area coverage between two access points where in t er f erenc e is a major concern. For e xample , if wireless coverage is
intended for half of the area, then selec t 50% as the option. Use the drop-down menu to selec t 100%, 50%, 25%, or 12.5%.
WMM stands f or Wi-Fi Multimedia. Enabling this feature will improve the user experience for audio and video applications over
a Wi-Fi net w or k .
To effectively optimize throughput over long distance links enter a value for Acknowledgement Time Out between 64 to 200
microseconds in the 2.4 GHz in the field provided .
S elec t Enable or Disable . Enabling a short guard interval can increase throughput . Ho w ever , be aware that it can also increase
the error r a t e in some installations due to increased sensitivity to radio-frequency installa tions .
S elec t Enable or Disable . I n t er net Gr oup M anagemen t P r ot oc ol allo w s the AP t o r ec og niz e IGMP quer ies and repor ts sen t between
r out ers and an IGMP host (wireless ST A ). W hen IGMP snooping is enabled , the AP will forward multicast packets to an IGMP host
based on IGMP messages passing through the AP.
Adjust the multicast packet data r a t e her e . The multicast r a t e is supported in AP mode , and WDS
with
AP mode , including M ulti-SSIDs
Enable this option to reduce in t er f erenc e from other wireless networks in your area. If the channel width is operating at 40MHz
and ther e is another wir eless net w or k’ s channel ov er -lapping and causing in t er f erenc e , the A cc ess P oin t will aut oma tically change
to 20MHz