User's Manual
Table Of Contents
- Product Overview
- Wireless Basics
- Five Operational Modes
- Getting Started
- Configuration
- Save and Activate Settings
- Basic Settings
- Advanced Settings
- Status
- Maintenance
- Firmware and SSL Certification Upload
- Configuration File Upload
- Time and Date
- Help
- Troubleshooting
- Networking Basics
- Technical Specifications
64D-Link DAP-2310 User Manual
Section 3 - Conīguration
WLAN Partition
Displays the current wireless band rate.
Select Enable or Disable.
The default is Enable. When disabled, all data
from the Ethernet to associated wireless devices
will be blocked. Wireless devices can still send
data to the Ethernet.
The default value is Enable, which allows stations
to inter-communicate by connecting to a target
AP. When disabled, wireless stations cannot
exchange data through the AP.
Wireless Band:
Link Integrity:
Ethernet to
WLAN Access:
Internal Station
Connection: