User's Manual

70D-Link DAP-2310 User Manual
Section 6 - Troubleshooting

Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab,
click the button to restore the settings to their defaults.
Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings
button. Make sure nothing is checked. Click OK.
Advanced tab and click the button to restore these settings to their defaults. Click OK three
times.


address bar. This should open the login page for your the web management.


different computer.

If you forgot your password, you must reset your access point. Unfortunately, this process will change all your settings
back to the factory defaults.

on, use a paperclip to hold the button down for 10 seconds. Release the button and the access point will go through
its reboot process. Wait about 30 seconds to access the access point. The default IP address is 192.168.0.50. When
logging in, the username is admin and leave the password box empty.