User's Manual

46D-Link DAP-2310 User Manual

Static Pool Setting


Dynamic Host Configuration Protocol
     
devices on the network. This protocol

new wireless devices to receive IP addresses
automatically without the need to manually
assign IP addresses. Select Enable to allow
the DAP-2310 to function as a DHCP server.
Use the Static Pool Settings to assign the
same IP address to a device every time you
start up. The IP addresses assigned in the
Static Pool list must NOT be in the same IP
range as the Dynamic Pool. After you have
assigned a static IP address to a device via
its MAC address, click Save; the device will
appear in the Assigned Static Pool at the

the device in this list.
Enter the MAC address of the device
requesting association here.

Function Enable/
Disable:
Assigned IP:
Assigned MAC
Address:
Subnet Mask: