User's Manual

44D-Link DAP-2310 User Manual

DHCP Server
Dynamic Pool Settings

Pool allows wireless stations to receive an available IP with lease time control. If needed or required in the network,
the DAP-2310 is capable of acting as a DHCP server.
   
assigns dynamic IP addresses to devices on
     
management and allows new wireless devices
to receive IP addresses automatically without
the need to manually assign new IP addresses.
Select Enable to allow the DAP-2310 to function
as a DHCP server.

on your network.
Enter the number of IP addresses available for
assignment. IP addresses are increments of the


All devices in the network must have the
same subnet mask to communicate. Enter the
submask for the network here.
Enter the IP address of the gateway on the
network.

determines the IP address of a network computer that has a dynamically assigned IP address.
Function Enable/
Disable:
IP Assigned
From:
The Range of
Pool (1-254):
Subnet Mask:
Gateway:
WINS: