User's Manual

40D-Link DAP-2310 User Manual

AP Array

This check box allows the user to enable the AP array
function. The three modes that are available are Master,
Backup Master, and Slave. APs in the same array will

the Master AP to the Slave AP and the Backup Master
AP when a Slave AP and a Backup Master AP join the
AP array.
Enter a name for the AP array you have created.
Enter a password that will be used to access the AP
array you have created.
Click this button to initiate a scan of all the available
APs currently on the network.
This table displays the current AP array status for the

Master, Backup Master, Slave, and Total.
This table displays all the current array members. The
DAP-2310 AP array feature supports up to eight AP
array members.
Enable Array:
AP Array Name:
AP Array
Password:
Scan AP Array
List:
AP Array List:
Current Array
Members: