User's Manual

30D-Link DAP-2310 User Manual

Basic > Wireless section, you can set the Primary
SSID. The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless
network or to establish a new wireless network.
Check to enable support for multiple SSIDs.
This read-only value is the current band
setting.

the Primary SSID, you have a total of four
multi-SSIDs.
      


setting is
dlink. The SSID can be easily
changed to connect to an existing wireless
network or to establish a new wireless
network.
Enable or Disable SSID visibility. Enabling
this feature broadcasts the SSID across the
network, thus making it visible to all network
users.
The Multi-SSID security can be Open System, WPA-Personal, WPA-Enterprise, or 802.1x. For a detailed description
of the Open System parameters, please go to page 25. For a detailed description of the WPA-Personal parameters,
please go to page 26. For a detailed description of the WPA-Enterprise parameters, please go to page 27. For a detailed
description of the O802.1x parameters, please go to page 28.
Enable
Multi-SSID:
Band:
Index:
SSID:
SSID Visibility:
Security:
Multi-SSID