User's Manual

27D-Link DAP-2310 User Manual

Static IP (Manual) is chosen here. Choose this
option if you do not have a DHCP server in your
network, or if you wish to assign a static IP address
to the DAP-2310. When Dynamic IP (DHCP) is

Please allow about two minutes for the DHCP client
to be functional once this selection is made.
The default IP address is 192.168.0.50. Assign a
static IP address that is within the IP address range
of your network.
Enter the subnet mask. All devices in the network
must share the same subnet mask.
Enter the IP address of the gateway in your network.
If there is a gateway in your network, please enter
an IP address within the range of your network.
LAN
Get IP
From:
IP
Address:
Subnet
Mask:
Default
Gateway:
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN

if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet.