User's Manual Part 1

60D-Link DAP-2230 User Manual
Section 3 - Conguration
Static Pool Setting
A static pool allows specic IP addresses to be reserved to wireless stations.
Function
Enable/
Disable:
Dynamic Host Conguration Protocol (DHCP) assigns IP addresses to wireless
devices on the network. This protocol simplies network management and
allows new wireless devices to receive IP addresses automatically without the
need to manually assign IP addresses. Select Enable to allow the DAP-2230
to function as a DHCP server.
Assigned IP: Use the Static Pool Settings to reserve IP addresses to specic devices. The IP
addresses assigned in the Static Pool list must NOT be in the same IP range
as the Dynamic Pool. After you have assigned a static IP address to a device
via its MAC address, click Save; the device will appear in the Assigned Static
Pool at the bottom of the screen. You can edit or delete the device in this list.
Assigned
MAC Address:
Enter the MAC address of the device requesting association here.
Subnet Mask: Dene the submask of the IP address specied in the IP Assigned From eld.
Gateway: Specify the Gateway address for the wireless network.
WINS: Specify the Windows Internet Naming Service (WINS) server address for
the wireless network. WINS is a system that determines the IP address of
a network computer with a dynamically assigned IP address, if applicable.
DNS: Enter the Domain Name System (DNS) server address for the wireless
network. The DNS server translates domain names such as www.dlink.com
into IP addresses.
Domain
Name:
Specify the domain name for the network.