User's Manual
38D-Link DAP-1955 User Manual
Section 3 - Conguration
Upgrade
Firmware upgrades may be provided for the DAP-1955 in the future. This page will allow you to upgrade the router’s rmware,
either automatically or manually. To manually upgrade the rmware, you must rst download the relevant le from http://support.
dlink.com. To access this page, click the Management drop down menu at the top of the page, and select Upgrade. Click Save at
any time to save the changes you have made on this page.
Firmware
Current Firmware
Version
The current rmware's version will be displayed.
Check for New
Firmware
Click this button to prompt the router to automatically check
for a new rmware version. If a newer version is found, it will
prompt you to install it.
Automatic Firmware Upgrade
Automatic Upgrade If enabled, the router will automatically check for and upgrade
to the newest rmware.
Choose Upgrade Time You may set the DAP-1955 to automatically upgrade its rmware
at a set time by enabling the function. Set the hour and minute
to automatically upgrade by using the drop-down menus.
Upgrade Manually
Upgrade Firmware If you wish to upgrade manually, rst download the rmware
le you wish to upgrade to. Next, click the Select File button to
browse to the le and click Upload to install the new rmware.