User's Manual
16D-Link DAP-1955 User Manual
Section 3 - Conguration
Wireless Setup Wizard
To access the setup utility for the DAP-1955
AC1900 Gigabit Dualband 3*3 11AC MU-MIMO Wi-Fi Range Extender on your
PC, rst connect to the DAP-1955 wirelessly using the Wi-Fi name (SSID) and
password located on the back of your DAP-1955. Then open a web browser and
enter http://dlinkap.local./ in your browser’s URL eld. You may also enter the IP
address* of the DAP-1955.
* The default IP address is 192.168.0.50. Once your DAP-1955 connects to the host network,
it will be assigned a new IP address based on your network’s DHCP settings. You will need
to log in to your router to see what IP address is assigned to your DAP-1955. For multiple
If this is your rst time logging in to the extender and no connection has been
established, the setup wizard will automatically appear. If the setup process was
not previously completed, then log in to the interface by leaving the password
eld blank.
The setup wizard is designed to guide you through a step-by-step process to congure your new DAP-1955
AC1900 Gigabit Dualband 3*3 11AC MU-MIMO Wi-Fi Range Extender to extend your wireless network and connect to the Internet
via a wireless setup process. To set your DAP-1955 using an Ethernet cable, please refer to “Access Point Mode Settings” on page