Version 1.
Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Hardware Revision Date Description A1 v1.00 13 February, 2020 Initial release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
Table of Contents Table of Contents Preface.................................................................................. i Product Overview............................................................... 1 Package Contents.......................................................................... 1 System Requirements.................................................................. 2 Introduction.................................................................................... 3 Features...........
Section 1 - Product Overview Product Overview Package Contents DAP-1750 AC1750 High Performance Mesh Wi-Fi Range Extender QIC Quick Install Card Ethernet Cable Simple Setup Guide If any of the above items are missing, please contact your reseller.
Section 1 - Product Overview System Requirements Network Requirements Web-based Configuration Utility Requirements D-Link Wi-Fi App Requirements D-Link DAP-1750 User Manual • A wireless router with an active Internet connection. • IEEE 802.11ac, 802.11n, 802.11g, 802.11b, or 802.
Section 1 - Product Overview Introduction Features High-speed Wireless Performance With Wireless 802.11ac Technology Thanks to the latest wireless AC technology, the DAP-1750 provides a wireless connection at up to 2000 Mbps* with other 802.11ac wireless devices. This feature lets you participate in real-time activities online, such as video streaming, online gaming, and real-time audio with smooth performance. Compatibility The DAP-1750 is fully compatible with the latest 802.
Section 1 - Product Overview What is a Wireless Extender? The DAP-1750 acts as a repeater to extend the range of an existing wireless network to provide a better signal for parts of your home or office that may have poor or no reception. Your existing wireless signal will be re-broadcast by the DAP-1750, allowing you to reach the farthest corners of your home or office.
Section 1 - Product Overview Hardware Overview Front 2 1 1 Status LED/WPS Button This LED indicates the current status of the DAP-1750, as detailed on the next page and functions as a WPS button. Press to establish a connection with another WPS compatible device. See page “WPS Button” on page 43 for more information. 2 Signal Indicator LED The more lit green bars on the Signal Indicator LED, the better the wireless signal to the host network. A single solid orange LED indicates a weak Wi-Fi signal.
Section 1 - Product Overview Status/WPS LED Indicator Status/WPS LED Indicator LED Indicator Color Green Power/Status Status Solid Blinking Description The DAP-1750 is receiving power and connected to a host network. WPS mode is active and is searching for another WPS device. Red Solid The DAP-1750 is booting or an error has occurred. Orange Blinking The DAP-1750 is not connected to a host network. None Off D-Link DAP-1750 User Manual Device is not receiving power. Check the power outlet.
Section 1 - Product Overview Bottom 1 2 3 1 Reset Button 2 Power Switch 3 LAN D-Link DAP-1750 User Manual Use an unfolded paperclip to press and hold the reset button on the bottom of DAP-1750 until a red light appears. Release the button and the extender will go through its reboot process to restore to factory default settings. Use the power switch to power the DAP-1750 when it will not be in use for an extended period of time. The factory default is ON.
Section 2 - Installation Back You may locate the Wi-Fi name (SSID) and password for your DAP-1750. This information is printed on the specification sticker on the back of the device. You will need this information to connect your computer or mobile device to the default network (SSID) of your DAP-1750. This information is also provided on the Quick Install Card.
Section 2 - Installation Installation Wireless Installation Considerations The DAP-1750 lets you extend your existing wireless network’s coverage as long as it is within range of the uplink network. Keep in mind that the DAP-1750’s extension network’s range may be limited by the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through.
Section 2 - Installation Hardware Setup Plug in the DAP-1750 to a power outlet. Verify that the power LED is blinking orange before continuing with configuration.
Section 3 - Configuration Getting Started There are several configuration tools you can use to set up your DAP-1750. • WPS PBC - To easily extend an existing wireless network refer to “WPS-PBC Configuration” on page 12 for setup instructions. • D-Link Wi-Fi App - Use your compatible iOS or Android device to configure your extender. Refer to “D-Link Wi-Fi” on page 14” on page 11 for setup instructions.
Section 3 - Configuration WPS-PBC Configuration Wireless Protected Setup (WPS) makes connecting your DAP-1750 easy. To use WPS, first make sure the source router or access point features a WPS Button or has a virtual WPS Button. Step 1 - Initiate WPS Mode While the Status/WPS LED is blinking orange, push the WPS button on the source wireless router or AP, and then push the WPS button on the DAP-1750. The Status/WPS LED will start to flash green. Please allow up to two minutes for the process to finish.
Section 2 - Installation Assessing Uplink Signal Strength The Status/WPS LED will turn solid green when the DAP-1750 has connected successfully to a wireless network and is extending that network. If the Smart Signal LED has a single orange bar after the connection process has finished, the DAP-1750 has established a poor quality connection. The more lit bars on the Signal Indicator LED, the better the wireless signal.
Section 2 - Installation D-Link Wi-Fi App Setup The D-Link Wi-Fi app allows you to install and configure your DAP-1750 from your compatible Android or iOS device. Note: The screenshots may be different depending on your mobile device’s OS version. The following steps show the iOS interface of the D-Link Wi-Fi app. If you are using an Android device, the appearance may be different from that of the screenshots, but the process is the same.
Section 3 - Configuration Step 4 Click Yes if you have the setup QR code with you to scan the QR code and proceed to step 6. If not, click No and proceed to step 5. Step 5 Slide the product options to AP and select DAP-1750 from the list of available devices. Click Next to continue. Step 6 You will now be guided through a step-by-step process for setting up your device. Simply follow the on-screen instructions to complete the installation and DAP-1750 configuration process.
Section 3 - Configuration Wireless Setup Wizard The setup wizard is designed to guide you through a step-by-step process to configure your new DAP-1750 AC1750 High Performance Mesh Wi-Fi Range Extender to extend your wireless network and connect to the Internet via a wireless setup process. To set your DAP-1750 using an Ethernet cable, please refer to “Access Point Mode Settings” on page 23.
Section 3 - Configuration Agree to the Terms of Use and Privacy Policy to continue. This wizard will guide you through configuring your new DAP-1750 by wireless means. Click Next to begin.
Section 3 - Configuration Please wait while your DAP-1750 scans for available Wi-Fi networks. The DAP-1750 will scan for available wireless networks and display a list of results. You may choose one of the following options to proceed: • • If the wireless network you wish to extend was detected by the scan, click on the network to select it. The extender will automatically forward you to the next step.
Section 3 - Configuration If the wireless network you wish to extend was detected by the scan, enter the password to your router now. Click Next to continue on to configure your extension network settings, or click Back to return to the previous step. YourRouter If you chose Manual , enter the Wireless Network Name (SSID) and Password of the existing Wi-Fi network you wish to connect to. Click Next to continue on to configure your extension network settings, or click Back to return to the previous step.
Section 3 - Configuration In order to secure the extender’s web configuration utility, please enter an admin password. You will be prompted for this password each time you want to use the extender’s web configuration utility. Click Next to continue. Select your time zone from the drop-down menu. Click Next to continue. Keeping your DAP-1750 firmware up to date provides you with the latest protection and new features over the air.
Section 3 - Configuration At the end of the wizard, you will be presented with a final summary of your settings. It is recommended that you record this information for future reference. Click Finish to close the wizard. YourRouter *Wireless network names and passwords are shown for example only. Your changes will be saved and the extender will reboot. Devices may be connected to the new wireless extension network(s) once the extender successfully reboots.
Section 3 - Configuration Click OK to exit the Setup Wizard. You will be redirected to the log in page. You can now place the DAP-1750 in a place where you require Internet access.
Section 3 - Configuration Access Point Mode Settings This page lets you configure the settings to use the DAP-1750 as an access point. Connect an Ethernet cable from your router’s LAN port to the LAN port at the bottom of the DAP-1750. To access this page, click the Settings drop-down menu at the top of the page, and select Extender. Click Save to apply the settings and return to the home page. Under Existing Network, choose Ethernet to utilize the DAP-1750 as an access point.
Section 3 - Configuration Configuration Home The home screen gives a summary of the current status of devices connected to the DAP-1750. A green check between the device and the uplink router indicates that there is an active connection. A red cross indicates that there is no connection present, or there is a connection error. If there’s no active uplink connection, click on the Click to Repair button to start the setup wizard.
Section 3 - Configuration Once your Internet connection is set up, you can view the details of the IPv4 Network, the IPv6 Network and the Wi-Fi network by clicking on the DAP-1750 icon. Upon clicking the Uplink Router icon, you will see the details of the Existing Network. This contains information regarding the Connection Type, Network Status, Connection Uptime, Wi-Fi name (SSID), and Password.
Section 3 - Configuration Clicking the Connected Clients icon will show you the devices that are currently connected to the DAP-1750, the network they are connected to, and their IP addresses. To edit each client’s settings, click the pencil icon on the client you want to edit. Name Vendor MAC Address IP Address Enter a custom name for this client. Displays the vendor of the device. Displays the MAC address of the device. Displays the current IP address of this client. Click Save when you are done.
Section 3 - Configuration Home - Connected to a D-Link Wi-Fi Mesh Router If the DAP-1750 is connected to a D-Link Wi-Fi Mesh supported router, login to the DAP-1750’s homescreen by typing in your router’s Admin Password. The DAP-1750’s home screen will only show the firmware information for the DAP-1750. Other functions for the DAP-1750 can be configured from the main router’s configuration page. Please make sure that the D-Link Wi-Fi Mesh feature is enabled in your compatible router’s wireless settings.
Section 3 - Configuration Settings Extender Settings This page lets you configure the settings for the DAP-1750’s extended wireless network. To access this page, click the Settings dropdown menu at the top of the page, and select Extender. Click Save to apply the settings and return to the home page.
Section 3 - Configuration Existing Network Existing Network Select the type of existing network, either Ethernet or Wi-Fi you want the DAP-1750 to connect to. Select Ethernet if you are connecting to your network via an Ethernet cable. Select Wi-Fi if you are connecting to your network by wireless means. Wi-Fi - Existing Network If Wi-Fi is selected, the following Wi-Fi Existing Network options will appear. Wi-Fi Name (SSID) Type in the Wi-Fi Name of the network you would like to extend.
Section 3 - Configuration Smart Connect Smart Connect Enable or disable the Smart Connect Feature. When enabled, only a few configuration options are available to simplify configuration. Extended Wi-Fi - Smart Connect Enabled Status Enable or disable the Extended Wi-Fi wireless network. Wi-Fi Name (SSID) This is the name of the DAP-1750’s extended network. If using Wi-Fi, the DAP-1750 will rebroadcast the uplink router’s Internet connection under this SSID.
Section 3 - Configuration Wireless - Smart Connect Disabled 2.4GHz Extended Wi-Fi Status Enable or disable the 2.4 GHz network by toggling this slider. Wi-Fi Name (SSID) This is the name of the DAP-1750’s extended network. If using Wi-Fi, the DAP-1750 will rebroadcast the uplink router’s Internet connection under this SSID. You may also manually set the SSID of the extended network. Password Enter the password or network key that you wish to use for the extended 2.4 GHz network.
Section 3 - Configuration Network Settings This page lets you configure the network settings for the DAP-1750. To access this page, click the Settings drop-down menu at the top of the page, then select Network. Click Save at any time to save the changes you have made on this page. Management Link You can change the URL name of the device by editing the text in the text box. If you change the name of the device, you will need to enter “http://xxxx.local.
Section 3 - Configuration IPv6 - Autoconfiguration (SLAAC/DHCPv6) My Internet Connection is Select Autoconfiguration (SLAAC/DHCPv6) to have the DAP-1750 automatically receive an IPv6 address from the uplink router. Obtain a DNS server address automatically You can select to obtain IPv6 DNS server information automatically, or you can select to configure DNS servers manually by selecting next to the option Use the following DNS address.
Section 3 - Configuration Management Time The Time page allows you to configure, update, and maintain the correct time on the internal system clock. From here you can set the time zone and the Network Time Protocol (NTP) server. In the Management menu on the bar on the top of the page, click Time & Schedule. Click Save at any time to save the changes you have made on this page. Time Configuration Time Zone Time Select your time zone from the drop-down menu.
Section 3 - Configuration Schedule Some router functions can be controlled through a pre-configured schedule. To create, edit, or delete schedules, from the Time page click Schedule. To return to the Time page, click Time. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add a Schedule button. Click Save when you are done.
Section 3 - Configuration Admin This page will allow you to set a new password for the administrator account used to configure the DAP-1750. To access this page, click the Management drop down menu at the top of the page, and select Admin. Click Save at any time to save the changes you have made on this page. Password Status LED Enter the Admin password. Turn on or off to configure the LED status lights.
Section 3 - Configuration System This page allows you to save or restore your system configuration, reset, or reboot the DAP-1750. To access this page, click the Management drop down menu at the top of the page, and select System. Save Settings To Local Hard Drive Save the system settings onto a file to the local hard drive. You will then see a file dialog where you can select a location and enter a file name for the configuration file.
Section 3 - Configuration Upgrade Firmware upgrades may be provided for the DAP-1750 in the future. This page will allow you to upgrade the router’s firmware, either automatically or manually. To manually upgrade the firmware, you must first download the relevant file from http://support. dlink.com. To access this page, click the Management drop down menu at the top of the page, and select Upgrade. Click Save at any time to save the changes you have made on this page.
Section 3 - Configuration Statistics This page displays details about your wireless and network connections. To access this page, click the Management drop-down menu at the top of the page, and select Statistics. Click Clear to reset the statistics. On the Statistics page you can view the amount of packets that pass through the router on the WAN, LAN, and wireless segments. You can view the LAN, Wi-Fi, 2.4 GHz Extended Wi-Fi, or 5 GHz Extended Wi-Fi by clicking on the respective tabs at the top.
Section 4 - Wi-Fi Mesh Setup D-Link Wi-Fi Mesh Setup D-Link’s Wi-Fi Mesh is a scalable solution that allows you to easily increase the coverage of your home or office wireless AC network. Expand your Wi-Fi coverage by adding compatible D-Link access points. Mix and match suitable D-Link devices according to your budget and preferences to fit any floor plan.
Section 4 - Wi-Fi Mesh Setup Setup Using the D-Link Wi-Fi App To set up your Wi-Fi Mesh network using the D-Link Wi-Fi app, first refer to “D-Link Wi-Fi App Setup” on page 14. When the app leads you to the setup wizard of the device, you can choose to either • • Extend your home network by amplifying your router’s wireless signal OR Extend your home network by using a wired connection to your router.
Section 4 - Wi-Fi Mesh Setup Setup Using an Ethernet Cable Step 1 Connect and plug in the DAP-1750 close to your Wi-Fi Mesh router and wait for the LED light to blink orange. <1m Step 2 Use the Ethernet cable to connect the DAP-1750 to one of the LAN ports on the Wi-Fi Mesh router. The pairing process may take a few minutes. The status and the signal indicator LEDs on the DAP-1750 will turn solid green once it has finished pairing with your Wi-Fi Mesh router.
Section 5 - Connecting a Wireless Client Connecting Wireless Clients to the Extender WPS Button Once an uplink network has been established, you may use the DAP-1750’s WPS function to add additional wireless clients to your extender’s network. Many wireless devices such as wireless routers, media players, printers, and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DAP-1750.
Section 5 - Connecting a Wireless Client Windows® 10 To join an existing network, locate the wireless network icon in the taskbar, next to the time display and click on it. Wireless Icon Clicking on this icon will display a list of wireless networks which are within range of your computer. Select the desired network by clicking on the SSID. To connect to the SSID, click Connect. To automatically connect with the router when your device next detects the SSID, check the Connect Automatically check box.
Section 5 - Connecting a Wireless Client Windows® 8 - WPA/WPA2 To join an existing network, locate the wireless network icon in the taskbar, next to the time display. Wireless Icon Clicking on this icon will display a list of wireless networks which are within connecting proximity of your computer. Select the extender’s network by clicking on the network name. dlink You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network.
Section 5 - Connecting a Wireless Client When you have established a successful connection with a wireless network, the word Connected will appear next to the name of the network to which you are connected.
Section 6 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DAP-1750. Read the following descriptions if you are having problems. 1. Why can’t I access the web-based configuration utility? When entering the IP address of the AC1750 High Performance Mesh Wi-Fi Range Extender (dlinkap.local./), you are not connecting to a website nor do you have to be connected to the Internet.
Section 6 - Troubleshooting • Configure your Internet settings: • Go to the Control Panel. Search for Internet Options. From the Security tab, click the button to restore the settings to their defaults. • Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. • Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
Appendix A - Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely and conveniently access your network. You will be able to enjoy the freedom that wireless networking delivers.
Appendix A - Wireless Basics Tips Here are a few things to keep in mind when you are installing your AC1750 High Performance Mesh Wi-Fi Range Extender. Centralize the extender’s location For best performance, make sure you place the extender in a centralized location within your desired usage area. Try to place the extender so that there are minimal obstructions between it and the uplink router. If possible, use an elevated power outlet, so the signal can be dispersed more easily.
Appendix B - Technical Specifications Technical Specifications Standards • IEEE 802.11ac • IEEE 802.11a • IEEE 802.11n • IEEE 802.11g • IEEE 802.11b • IEEE 802.3u • IEEE 802.3ab • IEEE 802.11k • IEEE 802.11v Wireless Frequency Range 1 • 2.4 GHz to 2.4835 GHz • 5.18 MHz to 5.85 MHz Device Interfaces • 802.
Appendix C - GPL Code Statement GPL Code Statement This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at: http://tsd.dlink.com.tw/GPL.
Appendix C - GPL Code Statement Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users.
Appendix C - GPL Code Statement Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free.
Appendix C - GPL Code Statement 1. Source Code. The “source code” for a work means the preferred form of the work for making modifications to it. “Object code” means any non-source form of a work. A “Standard Interface” means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language.
Appendix C - GPL Code Statement 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work.
Appendix C - GPL Code Statement 4. Conveying Verbatim Copies.
Appendix C - GPL Code Statement 6. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways: a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange.
Appendix C - GPL Code Statement A “User Product” is either (1) a “consumer product”, which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage.
Appendix C - GPL Code Statement 7. Additional Terms. “Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law.
Appendix C - GPL Code Statement All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term.
Appendix C - GPL Code Statement 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License.
Appendix C - GPL Code Statement 11. Patents. A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor’s “contributor version”.
Appendix C - GPL Code Statement A patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License.
Appendix C - GPL Code Statement 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
Appendix C - GPL Code Statement 16. Limitation of Liability.
Appendix D - Regulatory Statements Regulatory Statements Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix D - Regulatory Statements IMPORTANT NOTICE: FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 27 cm between the radiator and your body.
Appendix D - Regulatory Statements Innovation, Science and Economic Development Canada (ISED) Statement: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Innovation, Science and Economic Development Canada (ISED) Statement: This device complies with ISED licence-exempt RSS standard(s).
Appendix D - Regulatory Statements 5G 2.4 G Frequency Band(s) Frequenzband Fréquence bande(s) Bandas de Frecuencia Frequenza/e Frequentie(s) Max. Output Power (EIRP) Max. Output Power Consommation d’énergie max. Potencia máxima de Salida Potenza max. Output Max. Output Power 5.15 – 5.25 GHz 200 mW 5.25 – 5.35 GHz 200 mW 5.47 – 5.725 GHz 1W 2.4 – 2.
Appendix D - Regulatory Statements European Community Declaration of Conformity: Česky [Czech] Tímto D-Link Corporation prohlašuje, že tento produkt, jeho příslušenství a software jsou v souladu se směrnicí 2014/53/EU. Celý text ES prohlášení o shodě vydaného EU a o firmwaru produktu lze stáhnout na stránkách k produktu www.dlink.com. Dansk [Danish] D-Link Corporation erklærer herved, at dette produkt, tilbehør og software er i overensstemmelse med direktiv 2014/53/EU.
Appendix D - Regulatory Statements Latviski [Latvian] Ar šo uzņēmums D-Link Corporation apliecina, ka šis produkts, piederumi un programmatūra atbilst direktīvai 2014/53/ES. ES atbilstības deklarācijas pilno tekstu un produkta aparātprogrammatūru var lejupielādēt attiecīgā produkta lapā vietnē www.dlink.com. Lietuvių [Lithuanian] Šiuo dokumentu „D-Link Corporation“ pareiškia, kad šis gaminys, priedai ir programinė įranga atitinka direktyvą 2014/53/ES.
Appendix D - Regulatory Statements Íslenska [Icelandic] Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun 2014/53/EB. Sækja má ESB-samræmisyfirlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www. dlink.com. Norsk [Norwegian] Herved erklærer D-Link Corporation at dette produktet, tilbehøret og programvaren er i samsvar med direktivet 2014/53/EU.
Appendix D - Regulatory Statements NOTICE OF WIRELESS RADIO LAN USAGE IN THE EUROPEAN COMMUNITY (FOR WIRELESS PRODUCT ONLY): • • This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz band to reduce the potential for interference. This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries.
Appendix D - Regulatory Statements AVIS CONCERNANT L'UTILISATION DE LA RADIO SANS FIL LAN DANS LA COMMUNAUTÉ EUROPÉENNE (UNIQUEMENT POUR LES PRODUITS SANS FIL) • • Cet appareil est limité à un usage intérieur lorsqu'il est utilisé dans la Communauté européenne sur les canaux de la bande de 5,15 à 5,35 GHz afin de réduire les risques d'interférences.
Appendix D - Regulatory Statements AVVISO PER L’USO DI LAN RADIO WIRELESS NELLA COMUNITÀ EUROPEA (SOLO PER PRODOTTI WIRELESS) • • Nella Comunità europea, l’uso di questo dispositivo è limitato esclusivamente agli ambienti interni sui canali compresi nella banda da 5,15 a 5,35 GHz al fine di ridurre potenziali interferenze. Questo dispositivo è un sistema di trasmissione a banda larga a 2,4 GHz (ricetrasmittente), destinato all’uso in tutti gli stati membri dell’Unione europea e nei paesi EFTA.
Appendix D - Regulatory Statements SAFETY INSTRUCTIONS The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details. • Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal) before touching the product. • Do not attempt to service the product and never disassemble the product.
Appendix D - Regulatory Statements CONSIGNES DE SÉCURITÉ Les consignes générales de sécurité ci-après sont fournies afin d’assurer votre sécurité personnelle et de protéger le produit d’éventuels dommages. Veuillez consulter les consignes d’utilisation du produit pour plus de détails. • L’électricité statique peut endommager les composants électroniques. Déchargez l’électricité statique de votre corps (en touchant un objet en métal relié à la terre par exemple) avant de toucher le produit.
Appendix D - Regulatory Statements ISTRUZIONI PER LA SICUREZZA Le seguenti linee guida sulla sicurezza sono fornite per contribuire a garantire la sicurezza personale degli utenti e a proteggere il prodotto da potenziali danni. Per maggiori dettagli, consultare le istruzioni per l’utente del prodotto. • L’elettricità statica può essere pericolosa per i componenti elettronici. Scaricare l’elettricità statica dal corpo (ad esempio toccando una parte metallica collegata a terra) prima di toccare il prodotto.
Appendix D - Regulatory Statements Disposing and Recycling Your Product ENGLISH EN This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has reached the end of its life, some will accept products for free.
Appendix D - Regulatory Statements FRANÇAIS FR Ce symbole apposé sur le produit ou son emballage signifie que, conformément aux lois et règlementations locales, ce produit ne doit pas être éliminé avec les déchets domestiques mais recyclé. Veuillez le rapporter à un point de collecte prévu à cet effet par les autorités locales; certains accepteront vos produits gratuitement. En recyclant le produit et son emballage de cette manière, vous aidez à préserver l’environnement et à protéger la santé de l’homme.
Appendix D - Regulatory Statements ITALIANO IT La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformità alle leggi e alle normative locali, questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il prodotto presso un punto di raccolta indicato dalle autorità locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti da riciclare.
Appendix D - Regulatory Statements POLSKI PL Ten symbol umieszczony na produkcie lub opakowaniu oznacza, że zgodnie z miejscowym prawem i lokalnymi przepisami niniejszego produktu nie wolno wyrzucać jak odpady czy śmieci z gospodarstwa domowego, lecz należy go poddać procesowi recyklingu. Po zakończeniu użytkowania produktu, niektóre odpowiednie do tego celu podmioty przyjmą takie produkty nieodpłatnie, dlatego prosimy dostarczyć go do punktu zbiórki wskazanego przez lokalne władze.
Appendix D - Regulatory Statements MAGYAR HU Ez a szimbólum a terméken vagy a csomagoláson azt jelenti, hogy a helyi törvényeknek és szabályoknak megfelelően ez a termék nem semmisíthető meg a háztartási hulladékkal együtt, hanem újrahasznosításra kell küldeni. Kérjük, hogy a termék élettartamának elteltét követően vigye azt a helyi hatóság által kijelölt gyűjtőhelyre. A termékek egyes helyeken ingyen elhelyezhetők.
Appendix D - Regulatory Statements DANSK DK Dette symbol på produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke må bortskaffes som husholdningsaffald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder, når det er nået til slutningen af dets levetid. I nogle tilfælde vil produktet blive modtaget gratis.
Appendix D - Regulatory Statements SVENSKA SE Den här symbolen på produkten eller förpackningen betyder att produkten enligt lokala lagar och föreskrifter inte skall kastas i hushållssoporna utan i stället återvinnas. Ta den vid slutet av dess livslängd till en av din lokala myndighet utsedd uppsamlingsplats, vissa accepterar produkter utan kostnad. Genom att på detta sätt återvinna produkten och förpackningen hjälper du till att bevara miljön och skydda människors hälsa.
