User's Manual
41D-Link DAP-1665 User Manual
Section 3 - Conguration
If you have already dened VLAN IDs, you can choose if the
clients accessing the 2.4 or 5 GHz band will be able to see other
clients connected to that VLAN. The default setting is None.
If you have added a rule under Management >> Schedule, click
on the drop-down menu to choose whether the device will
be Always Enable or choose from the name of your custom
schedule. Click Save to store the setting and the device will
reboot to activate the selected schedule.
Enable WPS-PBC status if you wish to allow push button
connections to this device.
Unlocked enables the use of the PIN method for Wi-Fi Protected
Setup (WPS).
Enable this function and enter a number in the Maximum
User Client box to limit the amount of client connections to
this device.
WiFi VLAN:
Schedule:
Wi-Fi
Protected
Setup:
User Limit:
VLAN
Name:
VLAN ID:
Priority ID:
Enter a name for this rule.
Enter an ID number for this VLAN.
Choose between 0 to 7 priorities levels. The type of priority you
wish to assign to this rule is described next to the number.