User's Manual

32D-Link DAP-1620 User Manual
Section 3 - Conguration
Extender Settings
This page lets you congure the settings for the DAP-1620’s extended wireless network. To access this page, point to the Settings
drop-down menu at the top of the page, and select Extender. Click Save to save the settings and return to the home page.
Enable or disable this network by toggling this slider.
This is the name of the DAP-1620’s extended network.
The DAP-1620 will rebroadcast the uplink router’s Internet
connection under this SSID. You can also choose to make
the SSID for the extended network the same as the SSID for
the uplink network.
Select the type of wireless security you wish to use for the
extended network. Choose None or WPA/WPA2 Personal.
Enter the password or network key that you wish to use for
the extended network.
Select Auto or any channel from 1 to 11 for use with this
network.
Select Auto 20/40 or 20 MHz for the bandwidth you wish
this network to use.
Enable or disable HT20/40 coexistence by toggling the slider.
Status:
Wi-Fi Name
(SSID):
Security:
Password:
Wi-Fi
Channel:
Channel
Width:
HT20/40
Coexistence:
2.4 GHz
Existing Network
Select between Ethernet or Wi-Fi as you existing network
depending on if you wish to use the DAP-1620 as a access
point or a repeater, respectively.
Existing
Network: