User's Manual Part 1

71D-Link DAP-1560 User Manual
Section 4 - Security
Congure WPA-Personal (AP Mode)
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based conguration by opening a web browser
and entering the IP address of the access point (192.168.0.50). Click
on Setup and then click Wireless Settings on the left side.
/FYUUPSecurity Mode in the Wireless Security Mode sectionTFMFDU
WPA-Personal.
/FYUUPWPA Mode in the WPA section, select Auto (WPA or WPA2),
WPA2 Only, or WPA Only. Use Auto if you have wireless clients
using both WPA and WPA2.
/FYUUP$JQIFS5ZQFTFMFDUTKIPAESPSTKIP and AES.
/FYUUPGroup Key Update IntervalFOUFSUIFBNPVOUPGUJNFCFGPSFUIFHSPVQLFZVTFEGPSCSPBEDBTUBOENVMUJDBTUEBUBJT
changed.
/FYUUPUIFPre-Shared KeyTFDUJPOFOUFSBLFZJOUIF1BTTQISBTFöFME5IFLFZJTFOUFSFEBTBQBTTQISBTFJO"4$**GPSNBUBU
both ends of the wireless connection. The passphrase must be between 8-63 characters.
7. Click Save Settings at the top of the window to save your settings. If you are conguring the access point with a wireless
BEBQUFSZPVXJMMMPTFDPOOFDUJWJUZVOUJMZPVFOBCMF81"14,POZPVSBEBQUFSBOEFOUFSUIFTBNFQBTTQISBTFBTZPVEJEPO
the access point.