User's Manual Part 1
70D-Link DAP-1560 User Manual
Section 4 - Security
Congure WEP in AP Mode
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based conguration by opening a web browser and entering the IP address of the access point (192.168.0.50).
Click on Setup and then click Wireless Settings on the left side.
/FYUUP4FDVSJUZ.PEFJOUIF8JSFMFTT4FDVSJUZ.PEFTFDUJPO
select WEP.
/FYUUP8&1,FZ-FOHUIJOUIF8&1TFDUJPOTFMFDUCPUIUIFUZQF
PGJOQVUIFYJEFDJNBMPS"4$**BOEUIFMFWFMPGFODSZQUJPO
PSCJU)FYSFDPNNFOEFE-FUUFST"'BOEOVNCFST
are valid.
/FYUUP%FGBVMU8&1,FZBOEUIFöSTUTFMFDUJPOPOUIFESPQEPXONFOV8&1,FZ&OUFSB8&1LFZUIBUZPVDSFBUFJOUIF8&1
,FZWBMVFBOE7FSJGZ8&1,FZWBMVFöFMET.BLFTVSFZPVFOUFSUIJTLFZFYBDUMZPOBMMZPVSXJSFMFTTEFWJDFT:PVNBZFOUFSVQ
to 4 dierent keys using the Default WEP Key drop-down menu.
/FYUUPAuthenticationTFMFDUOpen or Shared Key.
6. Click Save Settings at the top of the window to save your settings. If you are conguring the access point with a wireless
BEBQUFSZPVXJMMMPTFDPOOFDUJWJUZVOUJMZPVFOBCMF8&1POZPVSBEBQUFSBOEFOUFSUIFTBNF8&1LFZBTZPVEJEPOUIF
access point.










