User's Manual Part 1

55D-Link DAP-1560 User Manual
Section 3 - Conguration
LAN Connection
Type:
Access Point IP
Address:
Subnet Mask:
Default Gateway:
Device Name:
Use the drop-down menu to select Static IP if you
XBOUUP NBOVBMMZBTTJHOUIF *1BEESFTTTVCOFU
NBTLBOEHBUFXBZBEESFTTFT4FMFDUDynamic IP
(DHCP) to automatically receive an IP address from
your DHCP server or router.
Enter the IP address you want to assign the bridge.
Enter the Subnet Mask you want to assign the
bridge.
Enter the Gateway you want to assign the bridge.
Enter the Device Name of the AP and click Next to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
This section will allow you to change the local network settings of the bridge and to congure the Static settings.
Network Settings
Static