User's Manual Part 1

53D-Link DAP-1560 User Manual
Section 3 - Conguration
Wireless Mode:
Site Survey:
Wireless Type:
Wireless
Network
Name:
Wireless
Channel:
802.11 Band
802.11 Mode:
Transmission
Rate:
Channel Width:
Wireless Client will be displayed.
Click to display available wireless networks within range of the
DAP-1560. Select the network you want to connect to and enter
any security settings required.
Select Infrastructure if connecting to a wireless router or
access point (most common) or Ad-Hoc if connecting directly
to another wireless client in Ad-Hoc mode.
*GZPVEJE OPUVTFUIF 4JUF4VSWFZPQUJPO FOUFS UIF44*% PS
OFUXPSLOBNF FYBDUMZ BT JUJTTFU PO ZPVSXJSFMFTTSPVUFSPS
access point.
Indicates the channel setting for the DAP-1560. The Channel can
CFDIBOHFEUPöUUIFDIBOOFMTFUUJOHGPSBOFYJTUJOHXJSFMFTT
network or to customize the wireless network (Ad-Hoc mode).
5IFPQUJPOTJODMVEF()[()[BOE()[()[
If all of the wireless devices in your wireless network can
DPOOFDUJOUIF TBNF USBOTNJTTJPONPEFZPVDBO JNQSPWF
performance slightly by choosing the appropriate “Only” mode.
If you have some devices that use a dierent transmission
NPEFDIPPTFUIFBQQSPQSJBUFi.JYFEwNPEF
Select the transmit rate. It is strongly suggested to select Best
(automatic) for best performance. This option is unavailable in
Bridge Mode.
Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Wireless