User's Manual Part 1

25D-Link DAP-1560 User Manual
Section 3 - Conguration
Enable Wireless:
Wireless Mode:
Wireless Network
Name:
Enable Auto
Channel Scan:
Wireless
Channel:
802.11 Band:
802.11 Mode:
$IFDLUIFCPYUPFOBCMFUIFXJSFMFTTGVODUJPO*GZPVEPOPU
XBOUUPVTFXJSFMFTTVODIFDLUIFCPYUPEJTBCMFBMMUIFXJSFMFTT
functions.
The current wireless mode is set to Access PointJUXJMMDSFBUFB
wireless infrastructure network.
8IFOZPVBSFCSPXTJOHGPSBWBJMBCMFXJSFMFTTOFUXPSLTUIJTJT
the name that will appear in the list (unless Visibility Status is
TFUUP*OWJTJCMFTFFCFMPX5IJTOBNFJTBMTPSFGFSSFEUPBTUIF
44*%'PSTFDVSJUZQVSQPTFTJUJTIJHIMZSFDPNNFOEFEUPDIBOHF
from the default network name.
The Auto Channel Scan setting can be selected to allow the
DAP-1560 to choose the channel with the least amount of
interference.
Indicates the channel setting for the DAP-1560. If you enable
"VUP$IBOOFM4DBOUIJTPQUJPOXJMMCFHSBZFEPVU
Operating frequency band. Choose 2.4GHz for visibility to
legacy devices and for longer range. Choose 5GHz for least
interference.
*GZPVDIPPTF()[CBOEUIFOTFMFDUPOFPGUIFGPMMPXJOH
802.11g Only - Select if all of your wireless clients are 802.11g.
Mixed 802.11n and 802.11g - Select if you are using both 802.11n and 802.11g wireless clients.
802.11n Only - Select only if all of your wireless clients are 802.11n.
Mixed 802.11n, 802.11g, and 802.11b4FMFDUJGZPVBSFVTJOHOHBOECXJSFMFTTDMJFOUT
*GZPVDIPPTF()[CBOEUIFOTFMFDUFJUIFS802.11a Only, 802.11n Only, or Mixed 802.11n and 802.11a.
Manual Conguration
Wireless Settings