User's Manual
Table Of Contents
- Preface
- Product Overview
- Installation
- AP/Bridge Mode
- Configuration for AP Mode
- Configuration for Bridge Mode
- Wireless Security
- Connect to a Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
- Technical Specifications
- Contacting Technical Support
- Warranty
- Registration
9D-Link DAP-1533 User Manual
Section 1 - Product Overview
Hardware Overview
Connections
1 WPS Button
Press for 3 seconds to start the WPS process. After pressing, the AP or Bridge LED (depending
what mode you have selected) will blink. Within 2 minutes, press the WPS button on the wireless
device you want to connect to.
2 LAN Ports (1-4) Connect 10/100/1000 Ethernet devices such as computers, switches, and NAS devices.
3 Mode Switch Three-way switch used to select AP 2.4GHz, AP 5GHz or Bridge mode.
4 USB Port
Connect a multifunction printer and share printing and scanning functions to users on your
network. You may also connect a USB thumb drive/external hard drive for WCN and sharing les.
5 ON/OFF Button Press to power on and o your DAP-1533.
6 Reset Button Pressing the Reset button restores the DAP-1533 to its original factory default settings.
7 Power Receptor Receptor for the supplied power adapter.
3
2
75 64
1