User's Manual
Table Of Contents
- Preface
- Product Overview
- Installation
- AP/Bridge Mode
- Configuration for AP Mode
- Configuration for Bridge Mode
- Wireless Security
- Connect to a Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
- Technical Specifications
- Contacting Technical Support
- Warranty
- Registration
26D-Link DAP-1533 User Manual
Section 3 - Conguration
Device Name:
IPv4 Connection
Type:
Access Point IP
Address:
Subnet Mask:
Default
Gateway:
Enter the Device Name of the AP. It is recommended
to change the Device Name if there is more than
one D-Link device within the subnet.
Use the drop-down menu to select Static IP.
Enter the IP address of the access point. The default
IP address is http://192.168.0.50. If you change the
IP address, once you click Save Settings, you will
need to enter the new IP address in your browser
to get back into the conguration utility.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
Static IP