User's Manual

70D-Link DAP-1525 User Manual
Section 6 - Troubleshooting
• Congure your Internet settings:
• GotoStart>Settings>ControlPanel.Double-clicktheInternetOptionsIcon.FromtheSecuritytab,clickthebutton
torestorethesettingstotheirdefaults.
• ClicktheConnectiontabandsetthedial-upoptiontoNeverDialaConnection.ClicktheLANSettingsbutton.Make
surenothingischecked.ClickOK.
• GototheAdvancedtabandclickthebuttontorestorethesesettingstotheirdefaults.ClickOKthreetimes.
• CloseyourWebbrowser(ifopen)andopenit.
• Access the Web management. Open your Web browser and enter the IP address of your D-Link Access Point in the
address bar. This should open the login page for your the Web management.
• If you still cannot access the conguration, unplug the power to the Access Point for 10 seconds and plug back in.
Wait about 30 seconds and try accessing the conguration. If you have multiple computers, try connecting using a
different computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your Access Point. Unfortunately this process will change all your settings
back to the factory defaults.
To reset the Access Point, locate the reset button (hole) on the rear panel of the unit. With the Access Point powered
on, use a paperclip to hold the button down for 10 seconds. Release the button and the Access Point will go through
its reboot process. Wait about 30 seconds to access the Access Point. The default IP address is 192.168.0.50. When
logging in, the username is admin and leave the password box empty.