User's Manual

47D-Link DAP-1525 User Manual
Section 3 - Configuration
Time
Select the Time Zone from the drop-down menu.
Tick the check box to enable Daylight Saving
Time.
Click this button to set the device’s time the
same to local PC.
Tick the check box to enable the device to
automatically synchronize with a D-Link NTP
Server. NTP stands for Network Time Protocol.
NTP synchronizes computer clock times in a
network of computers. This will only connect
to a server on the Internet, not a local server.
Select one of the D-Link NTP Servers from
the drop-down menu. The DAP-1525 will then
synchronize its clock to be the same time as
the D-Link Internet
time server. Click the Update Now button to
synchronize with the D-Link Internet time server
immediatley.
To manually input the time, use the drop-down
menus to enter the values in these elds for the
Year, Month, Day, Hour, Minute, and Second.
Time Zone:
Enable
Daylight
Saving:
Sync your
computer’s time
settings:
Automatically
synchronize
with D-Link’s
Internet time
server:
NTP
Server Used:
Set the Time
and Date
Manually:
The Time Conguration option allows you to congure, update, and maintain the correct time on the internal system
clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also
be congured to automatically adjust the time when needed.
Click the Save Settings button to save any changes made.