User's Manual

42D-Link DAP-1525 User Manual
Section 3 - Configuration
LAN Setup
This section will allow you to change the local network settings of the bridge and to congure the Static settings.
Enter the Device Name of the AP. It is recommended
to change the Device Name if there is more than
one D-Link device within the subnet.
Use the drop-down menu to select Static IP if
your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. Select
Dynamic IP (DHCP) to automatically assign an
IP address to the computers on the LAN/private
network.
Enter the IP address of the Access Point. The
default IP address is 192.168.0.50.
If you change the IP address, once you click Save
Settings, you will need to enter the new IP address
in your browser to get back into the conguration
utility.
Enter the subnet mask. The default subnet mask
is 255.255.255.0.
Enter the default gateway IP address.
Enter the primary DNS server IP address.
Enter the secondary DNS server IP address.
Use the drop-down menu to select the IPv6 mode
connected to the IPv6 Internet.
Device Name:
LAN Connection
type:
IPv4 Address:
Subnet Mask:
Default Gateway:
Primary DNS
Server:
Secondary DNS
Server:
My IPv6
Connection is: