User's Manual

27D-Link DAP-1525 User Manual
Section 3 - Configuration
System
Use this option to save the current Access Point
conguration settings to a le on the hard disk
of the computer you are using. First, click the
Save button. You will then see a le dialog,
where you can select a location and le name
for the settings.
Use this option to load previously saved Access
Point configuration settings. First, use the
Browse control to nd a previously save le of
conguration settings. Then, click the Upload
Settings button to transfer those settings to the
Access Point.
Click the Restore Device button to restore all
conguration settings back to the settings that
were in effect at the time the Access Point was
shipped from the factory. Any settings that have
not been saved will be lost, including any rules
that you have created. If you want to save the
current Access Point conguration settings, use
the Save button above.
Click to reboot the access point.
Click the Clear button to restore the device back
to the English interface version and remove
other languages installed for the system web
pages.
Save Settings
To Local Hard
Drive:
Load Settings
From Local
Hard Drive:
Restore To
Factory
Default
Settings:
Reboot The
Device:
Clear
Language
Pack: