User's Manual
Table Of Contents
- Package Contents
- Installation
- Configuration
- Web-based Configuration Utility
- Wireless Setup Wizard
- Manual Configuration
- Advanced
- MAC Address Filter
- Wi-Fi Protected Setup
- User Limits
- Port Forwarding (WISP modes only)
- Port Filter (WISP modes only)
- DMZ (WISP modes only)
- Parental Control (WISP modes only)
- Advanced Network (WISP modes only)
- Maintenance
- Status
- Help
- Wireless Security
- Connect to a Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
- Technical Specifications
- Contacting Technical Support
- Warranty
56D-Link DAP-1360L User Manual
Section 3 - Conguration
Advanced Network (WISP modes only)
Check this box to use the Universal Plug and Play
(UPnP™) feature. UPnP provides compatibility with
networking equipment, software and peripherals.
Check this box to allow the WAN port of the
DAP-1360L to be pinged. Unchecking the box
will not allow the DAP-1360L to respond to pings.
Blocking ping response may provide some extra
security from intruders.
Remote management allows the DAP-1360L to be
congured from the Internet by a web browser. A
username and password are still required to access
the Web-Management interface. In general, only a
member of your network can browse the built-in
web pages to perform Administrator tasks. This
feature enables you to perform Administrator
tasks from the remote (Internet) host.
Enable UPnP:
Enable WAN Ping
Respond:
Remote
Management:
This function is available if the DAP-1360L is in WISP Client Router or WISP Range Extender Mode. This feature allows you to
change the LAN settings. Please be aware that any changes to the factory default settings may aect the behavior of your
network.