User's Manual
Table Of Contents
- Package Contents
- Installation
- Configuration
- Web-based Configuration Utility
- Wireless Setup Wizard
- Manual Configuration
- Advanced
- MAC Address Filter
- Wi-Fi Protected Setup
- User Limits
- Port Forwarding (WISP modes only)
- Port Filter (WISP modes only)
- DMZ (WISP modes only)
- Parental Control (WISP modes only)
- Advanced Network (WISP modes only)
- Maintenance
- Status
- Help
- Wireless Security
- Connect to a Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
- Technical Specifications
- Contacting Technical Support
- Warranty
54D-Link DAP-1360L User Manual
Section 3 - Conguration
DMZ (WISP modes only)
Check this box to enable DMZ.
Enter the IP address of the computer you would
like to open all ports to. You can select a computer
from the Computer Name drop-down menu and
click << to enter the computer name into the DMZ
Host IP Address eld.
Enable DMZ:
DMZ Host IP
Address:
This function is available only if the DAP-1360L is in the WISP Client Router or WISP Range Extender Mode. This feature allows
you to set up a DMZ (Demilitarized Zone) host. If you have a client PC that cannot run Internet applications properly from behind
the DAP-1360L, then you can set the client up for unrestricted Internet access. The DMZ allows a computer to be exposed to
the Internet. This feature is useful for gaming purposes. Enter the IP address of the computer that will be the DMZ host. Adding
a client to the DMZ may expose your local network to a variety of security risks, so only use this option as a last resort.