User's Manual

52D-Link DAP-1360L User Manual
Section 3 - Conguration
Port Forwarding (WISP modes only)
Check the box to congure a port forwarding rule.
Enter a name for the rule. You can select an application
name from the Application Name drop-down menu.
Click the << button to ll in the Name eld with the
application name that you selected.
Enter the IP address of the computer on your local
network that you want to allow the incoming service to.
Enter the port or ports that you want to open. If you
want to open one port, enter the same port in both
boxes.
Select TCP, UDP, or Both.
Port Forwarding
Rules:
Name:
IP Address:
Start/End Ports:
Trac Type:
This function is available if your DAP-1360L is in the WISP Client Router or WISP Range Extender Mode. This feature allows you
to open a single port or a range of ports. Click Save Settings and the port forwarding rule will be put into the Port Forwarding
List.