User's Manual
Table Of Contents
- Package Contents
- Installation
- Configuration
- Web-based Configuration Utility
- Wireless Setup Wizard
- Manual Configuration
- Advanced
- MAC Address Filter
- Wi-Fi Protected Setup
- User Limits
- Port Forwarding (WISP modes only)
- Port Filter (WISP modes only)
- DMZ (WISP modes only)
- Parental Control (WISP modes only)
- Advanced Network (WISP modes only)
- Maintenance
- Status
- Help
- Wireless Security
- Connect to a Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
- Technical Specifications
- Contacting Technical Support
- Warranty
51D-Link DAP-1360L User Manual
Section 3 - Conguration
User Limits
Check the Enable User Limit box to enable this
feature.
Enter the maximum number of clients, between 1
and 32.
Click Save Settings to save and activate the new
changes.
Enable User
Limit:
User Limit:
Save
Settings:
Enter the maximum number of wireless clients that can connect at one time to your access point.