User's Manual

47D-Link DAP-1360L User Manual
Section 3 - Conguration
Device Name:
LAN Connection
Type:
IP Address:
Subnet Mask:
Default Gateway:
Enter the Device Name of the AP. It recommended
to change the Device Name if there is more than
one D-Link device within the subnet. You can
enter the device name of the AP into your web
browser to access the instead of IP address for
conguration. If you are using the device name to
connect, ensure that your PC and your DAP-1360L
are on the same network.
Select Static IP from the drop-down menu.
Enter the IP address of the access point. The
default IP address is 192.168.0.50. If you change
the IP address, once you click Apply, you will need
to enter the new IP address in your browser to get
back into the conguration utility.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
Static IP
Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP
address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the elds
must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Access point will not accept the IP
address if it is not in this format.