User's Manual
Table Of Contents
- Package Contents
- Installation
- Configuration
- Web-based Configuration Utility
- Wireless Setup Wizard
- Manual Configuration
- Advanced
- MAC Address Filter
- Wi-Fi Protected Setup
- User Limits
- Port Forwarding (WISP modes only)
- Port Filter (WISP modes only)
- DMZ (WISP modes only)
- Parental Control (WISP modes only)
- Advanced Network (WISP modes only)
- Maintenance
- Status
- Help
- Wireless Security
- Connect to a Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
- Technical Specifications
- Contacting Technical Support
- Warranty
14D-Link DAP-1360L User Manual
Section 2 - Installation
Wireless Client Mode
In the Wireless Client mode, the DAP-1360L acts as a wireless network adapter for your Ethernet-enabled device (such as a
game console or a TV set-top box). Connect your Ethernet-enabled device to the AP using an Ethernet cable. The AP Client
mode can support multiple wired clients.
If you are going to connect several Ethernet-enabled devices to your DAP-1360L, connect the LAN port of the DAP-1360L to
an Ethernet switch, then connect your devices to this switch.
Example: Connect a gaming console using an ethernet cable to the DAP-1360L. The unit is set to Wireless Client mode which
will wirelessly connect to a wireless router on your network.
Internet Modem
Router
DAP-1360L
(in Wireless Client Mode)
Gaming Console