User Manual
45D-Link DAP-1360 User Manual
Section 3 - Conguration
You can input the wireless network name of
the root AP or click the Site Survey button to
nd the root AP.
Click this button to choose the root AP from
an available connection list. If the root AP
has wireless encryption, you have to use the
same wireless security mode to connect the
root AP.
This option is unavailable in WISP Client
Router and WISP Repeater mode.
Wireless Network
Name:
Site Survey:
Wireless
Channel:
Enable Auto
Channel Scan:
The channel used will be displayed. The
channel will follow the root AP.
Enable Hidden
Wireless:
This option is unavailable in WISP Client
Router and WISP Repeater mode.
WISP Client Router and WISP Repeater
In WISP Router Client mode, the DAP-1360 wirelessly connects to a WISP (Wireless Internet Service Provider) AP. In this mode, the DAP-
1360 also acts as a router for wired clients on your LAN and provides NAT (Network Address Translation) and a DHCP server to generate
IP addresses for wired clients. NAT and the DHCP server allow many computers to share the same wireless Internet connection.
WISP Repeater wireless mode acts the same as WISP Client Router wireless mode, with the addition of a wireless signal for any wireless
clients on the LAN.
Wireless
Security Mode:
Select a wireless security setting. Options are
None, WEP, WPA, or WPA2. See p.38 of this
manual for a detailed explanation of the wireless
security options.