User Manual
47D-Link DAP-1360 User Manual
Section 3 - Conguration
The DAP-1360 is set to Dynamic IP by default.
The IP address and subnet mask will fallback
to 192.168.0.50 and 255.255.255.0, if don’t
get IP address from DHCP server exceed 30
seconds.
Select this option if you are manually assigning
an IP Address.
LAN Settings
Enter the IP address of the access point.
My LAN
Connection is:
Static IP:
Dynamic IP:
IP Address:
Select this option if you would like to have an
IP Address automatically assigned to the DAP-
1360 by a DHCP server in your network.
Subnet Mask:
Gateway
address:
Enter the subnet mask of your access point.
Enter the IP Address of the router in your network.
Device
Name(NetBIOS
Name):
Enable DHCP
Server:
DHCP IP
Address Range
Lease Time:
It allows you to congure this device more easily when your network using TCP/IP protocol. You can enter the device
name of the AP into your web browser to access the instead of ip address for conguration.
Select this to enable the DHCP server if static IP address is selected.
Enter the starting and ending IP addresses for the DHCP server’s IP assignment.
Enter the length of time for the IP address lease.