User's Manual

18D-Link DAP-1353 User Manual
Section 3 - Configuration
WDS with AP mode
WDS with AP mode is selected from the pull-down
menu.
5GTXKEG5GV+FGPVKſGT55+&KUVJGPCOGFGUKIPCVGFHQTC
URGEKſEYKTGNGUUNQECNCTGCPGVYQTM9.#06JG55+&ŏU
factory default setting is dlink6JG55+&ECPDGGCUKN[
changed to connect to an existing wireless network or to
GUVCDNKUJCPGYYKTGNGUUPGVYQTM
Enable or Disable55+&XKUKDKNKV['PCDNKPIVJKUHGCVWTG
DTQCFECUVUVJG55+&CETQUUVJGPGVYQTMVJWUOCMKPIKV
XKUKDNGVQCNNPGVYQTMWUGTU
'PCDNKPIVJKUHGCVWTGCWVQOCVKECNN[UGNGEVUVJGEJCPPGN
VJCV YKNN RTQXKFG VJG DGUV YKTGNGUU RGTHQTOCPEG 6JKU
feature is not supported in WDS with AP mode. The
channel selection process only occurs when the AP is
DQQVKPIWR
All devices on the network must share the same channel. To change the channel, use the pull-down menu to make the
FGUKTGFUGNGEVKQP0QVG6JGYKTGNGUUCFCRVGTUYKNNCWVQOCVKECNN[UECPCPFOCVEJVJGYKTGNGUUUGVVKPIU
Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n wireless
clients. Auto 20/40 MHz CNNQYU[QWVQEQPPGEVVQDQVJPCPFDIYKTGNGUUFGXKEGUQP[QWTPGVYQTM
Mode:
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Channel Width:
Wireless Band:
In WDS with AP mode, the DAP-1353 wirelessly connects
multiple networks while still functioning as a wireless AP.
2.4GHz.