User's Manual

85D-Link DAP-1350 User Manual
Section 3 - Conguration
MAC Address Filter
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.
When Disable is selected, MAC addresses are not
used to control network access.
When Turn MAC Filtering ON and ALLOW
computers listed... is selected, only computers
with MAC addresses listed in the MAC Address List
are granted network access.
When Turn MAC Filtering ON and DISALLOW
computers listed... is selected, any computer
with a MAC address listed in the MAC Address List
is refused access to the network.
Enter the MAC address you would like to lter.
You can select a client currently connected to
your access point from the Wireless Client List
drop-down menu and then click << to populate
the MAC Address eld.
Click Save Settings to activate and save.
Click to remove the client from the MAC address
lter rule.
MAC Address
Filter:
MAC Address:
Clear: