User's Manual

104D-Link DAP-1350 User Manual
Section 3 - Conguration
Use this option to save the current router
conguration settings to a le on the hard disk
of the computer you are using. First, click the
Save button. You will then see a le dialog, where
you can select a location and le name for the
settings.
Use this option to load previously saved router
conguration settings. First, use the Browse control
to find a previously save file of configuration
settings. Then, click the Restore Conguration
from File button to transfer those settings to the
router.
This option will restore all conguration settings
back to the settings that were in effect at the
time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router conguration
settings, use the Save button above.
Click to reboot the router.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to
Factory Default
Settings:
Reboot Device:
System Settings