User's Manual

8D-Link DAP-1330 User Manual
Section 2 - Conguration
Setting Up Your DAP-1330
Plug in the DAP-1330 to a power outlet. Verify that the power LED
is blinking orange before continuing.
Outlet
Ethernet
There are two ways to congure your DAP-1330; using the QRS
Mobile app on your smartphone or tablet device, or using the
web GUI on your computer.
For detailed information on either of the methods for conguring
your DAP-1330, refer to the following sections of the manual:
• “QRS Mobile App Setup” on page 9
• “Web-based Conguration” on page 13
Locate the Wi-Fi name (SSID) and password for your DAP-1330
device. These details are printed on the specication sticker on
the underside of the device.
Using your computer or mobile device’s Wi-Fi connection utility,
connect to the SSID of your DAP-1330 and enter the password. If
you are unsure of how to connect to a wireless network, please
refer to “Connect to a Wireless Network” on page 31, or consult
your device’s user manual. Once connected, you are ready to begin
the setup process.