User's Manual

17D-Link DAP-1325/DAP-1330 User Manual
Section 3 - Conguration
Web-based Setup
Enter your password. By default, Admin is the username and cannot be changed,
and by default, the password is blank.
To access the setup utility for the DAP-1325/DAP-1330 AC1200 Wi-Fi Range
Extender with Power Passthrough on your PC, rst connect to the DAP-1325/
DAP-1330 wirelessly using the Wi-Fi name (SSID) and password located on your
Wi-Fi Conguration Card. Then open a web browser and enter http://dlinkap.
local./ in your browser’s URL eld. You may also enter the IP address* of the DAP-
1325/DAP-1330.
Note: Web browser conguration is not supported for Android Devices. Please
use the QRS Mobile Application to congure your device.
* The default IP address is 192.168.0.50. Once your DAP-1325/DAP-1330 connects to the
host network, it will be assigned a new IP address based on your network’s DHCP settings.
You will need to log in to your router to see what IP address is assigned to your DAP-1325/
DAP-1330.
For multiple DAP-1325/DAP-1330s, go to http://dlinkapxxxx.local. as shown on the
included Wi-Fi Conguration Card, with “xxxx” being the last four digits of the DAP-1325/
DAP-1330’s MAC address.
The conguration interface will open, and you can congure the various settings
for the DAP-1325/DAP-1330. If you have not yet congured an uplink network,
the home screen will show that there is no connection between the DAP-1325/
DAP-1330 and the uplink router.