User's Manual
15D-Link DAP-1325/DAP-1330 User Manual
Section 2 - Installation
The Status/WPS LED will turn solid green when the DAP-1325/DAP-1330 has connected successfully to a wireless network and is
extending that network. If the Smart Signal LED has a single amber bar after the connection process has nished, the DAP-1325/
DAP-1330 has established a poor quality connection. The more lit bars on the Signal Indicator LED, the better the wireless signal. To
improve the connection quality, the DAP-1325/DAP-1330 should be relocated closer to the source wireless router. If the extender
has been congured as an Access Point and is connected via Ethernet cable to an uplink network, the Smart Signal LED will not be
lit.
Optimize Extender Location
Best
Good
Ok
Poor