User's Manual

6D-Link DAP-1325/DAP-1330 User Manual
Section 1 - Product Overview
Hardware Overview
Top
1 2 3
4
1
Reset Button
Use an unfolded paperclip to press and hold the reset button on the bottom of DAP-1325/DAP-1330
for 10 seconds to restore the factory default settings.
2 Status/WPS LED
This LED indicates the current status of the DAP-1325/DAP-1330.
Refer to Status/WPS LED Indicator on page 8 for more information.
3 WPS Button
Press to establish a connection with another WPS compatible device.
Refer to Using the WPS Button on page 42 for more information.
4 Signal Indicator LED
The more lit green bars on the Signal Indicator LED, the better the wireless signal to the host network.
For more information refer to Optimize Extender Location on page 15.