User Manual

30D-Link DAP-1320 User Manual

Section 4 - Security

Connect a Wireless Client to your Router

WPS Button

Step 2 - Press the WPS button on your AP/Router.

The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless

devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button

(or a software utility with WPS) that you can press to connect to the DAP-1320 router. Please refer to your user manual for the

wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:

Step 1 - Plug the DAP-1320 into a wall outlet and verify if the power

LED has turned from red to a blinking amber.

Step 3 - Press and hold the WPS button until the light starts blinking

green and then release. Please allow up to two minutes for

the WPS process to nish. Once the connection is successful

the LED will be solid green.

DAP -1 32 0

WPS Button

Note: Usually the WPS LED will blink once it is pressed. Check your

router’s manual for more information.