User Manual

25D-Link DAP-1320 User Manual
Section 3 - Conguration
Time Zone:
Daylight
Saving:
Enable NTP
Server:
NTP Server
Used:
Date and Time:
Select the Time Zone from the drop-down menu.
To select Daylight Saving time manually, click the Enable
Daylight Saving check box. Next use the drop-down
menu to select a Daylight Saving Oset and then enter a
start date and an end date for daylight saving time.
NTP is short for Network Time Protocol. NTP synchronizes
computer clock times in a network of computers. Check
this box to use a NTP server. This will only connect to a
server on the Internet, not a local server.
Enter the NTP server or select one from the drop-down
menu.
To manually input the time, enter the values in these
elds for the Year, Month, Day, Hour, Minute, and Second
and then click Save Settings. You can also click the Copy
Your Computer’s Time Settings button at the bottom
of the screen.
Time
The Time Conguration option allows you to congure, update, and maintain the correct time on the internal system clock.
From this section you can set the time zone that you are in. Daylight Saving can also be congured to automatically adjust the
time when needed.