User Manual

24D-Link DAP-1150 User Manual
Section 3 - Configuration
Enable DHCP
Server:
Disabled is the default setting.
If you want to use the DAP-1150 as a DHCP server, to automatically assign dynamic IP addresses on the network, you will select
Enabled.
DHCP IP Address
Range:
If you have enabled the DHCP server function, enter the starting and Ending point of the IP address range for your
network.
DHCP Lease Time:
Choose the length of time during which the DHCP function of the DAP-1150 automatically regenerates the IP addresses to the
devices in your network.
Dynamic DHCP
Client List:
Lists the devices on your network that are receiving dynamic IP addresses from the DAP-1150.