Technical data

6.10 USB Printer 140
6.10 USB Printer
The HorstBox comes with a build-in printer server to share one
printer in a LAN. This printer server supports most printers
connected to the USB port, except GDI-printers
1
(host-based
printers).
Note: Only one USB printer may be shared at a time.
6.10.1 Share USB Printer
Connect the USB printer to the USB port on the back panel of
the HorstBox. Please be patient for a short moment while the
HorstBox detects and initialises the attached USB printer.
Refresh the page SHARE USB PRINTER.
The printer will be shown in the section “USB Printer”
Activate the desired printer and click on SAVE.
To save the settings, click on SAVE.
Saving successfully is reported in a success message (green
frame).
If an error occurs you will see an error message (red frame).
6.10.2 Do Not Share USB Printer
If you just want to set up a USB printer now activate the option
Do not share printer.
To save the settings, click on SAVE.
1
This printer uses a Windows API to preprocess the data.